PartDesign MoveTip/tr

PartDesign MoveTip
Menu location
Context menu → Set Tip
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign MoveFeature, PartDesign MoveFeatureInTree

Tanım

Set Tip, as this command is labeled in the context menu, redefines the tip, which is the feature exposed outside of the Body. By default, the tip is the last feature added to the Body; but sometimes it can be useful to temporarily set the tip to a feature earlier in the tree. This may be done to add a sketch, datum geometry or a feature which in retrospect should have been created earlier in the Body's history.

The tip is visually distinguished in the Tree View by an overlay icon consisting of a white arrow inside a green circle. For example, the following feature is the tip:

Usage

1. In the Tree View, right-click the feature to set as tip.
2. Select the Set Tip option from the context menu.
3. The new tip is set to visible, and all elements below the tip are hidden from view. Elements newly created from that point will be placed under the tip, and above the other existing elements.

Note: It is important not to forget to set the tip again to the last feature at the bottom of the Body tree.